Membrane Dryer
Series: Futura
Description: membrane dryer with prefilter
Medium: compressed air, neutral gases
Temperature range: +2°C - +50°C
Mounting: vertical, drain down
Fixing: 2 Befestigungswinkel
Nominal output (inlet pressure dew point +25°C, 7 bar): 50 l/min
Pressure dewpoint reduction at: 20°C
Supply pressure P1: 4 - 10 bar (below 4 bar reduced drying)
Leakage of pressure: 0,1 - 0,3 bar
Filter element: filter 5 μm (absolutely), micro filter 0,01 μm (absolutely)
Drain model: fully automatic
Noise level: < 45 dB (A)

For more information please refer to our catalogue

Central Filter Lubrication Unit
Part Number: 9.2488.00.000
Series: Futura
Description: differential pressure regulated central-lubricator
Supply pressure P1 max: 10 bar
Temperature range: -10°C - +60°C
Mounting: vertical, drain down
Fixing: install in pipe line, mounting bracket
Operating differential pressure area: 0,3 - 1 bar
Recommended operating differential pressure area: 0,5 bar
Bowl volume: 5 l
Flow range: 250 - 20000 l/min
Recommendated oil viscosity: 32 c St / 40°C
Kind of oil: CL 32 DIN 51517 - ISO VG 32
Grade of filtration of prefilter: 60 μm (absolutely)
Oil moist particle size: 0,3 - 2 μm

For more information please refer to our catalogue

Regulator Plate ISO
Part Number: 9.1811.00.400, 9.1811.00.401, 9.1811.00.600, 9.1811.00.800
Series: Futura
Description: air line regulator with diaphragm and relieving feature
Supply pressure P1 max: 16 bar
Temperature range: -10°C - +60°C
Fixing: about connection plate
Series: ISO 1
Regulation: A
Port size: regulation on 4 according to VDMA 24563

For more information please refer to our catalogue

Volumetric Flow Meter
Description: flow sensor
Medium: compressed air, neutral gases
Supply pressure P1 max: 16 bar
Temperature range: -10°C - +50°C
Voltage: 24 V =
Power (d.c. voltage): 1 - 2,5 W
Power (a.c. voltage): 3 VA
Protection class: IP 65 according to DIN 40050
Electrical connection: M12x1 5-pins
2 switching outputs: PNP / NPN
Air quality class: 5:4:3: according to ISO 8573-1 : 2010
Accuracy: ±3% Fullscale at 7bar and 23°C
Disclaimer: KKDM-2 is a state of the art sensing device. Depending on environmental and technical influences, the possibility of an offset drift is given -> display value without any flow -> please execute offset.For safety or medical applications we don't assume any responsibility. After the warranty period of 12 months, a periodical calibration is highly recommended. Please turn to our customer support.

For more information please refer to our catalogue