PRODUCTS > AIR PREPARATION > MASTER PNEUMATIC > REGULATORS > PRECISION & INTERNAL
MASTER PNEUMATIC AIR PREPARATION REGULATORS - PRECISION & INTERNAL
Should you require further information or cannot locate a product/service please do not hesitate to make contact - sales@macvalves.co.nz. Scroll through the listed products below for individual product information or click the series link you would like to view:
R57M Series - Miniature Precision Regulator - Aluminium
IR380 Series - Full Size Modular Precision Regulator - Die-cast Zinc
IR100 Series - Full Size Vanguard Modular Precision Regulator - Die-Cast Zinc
IR180M Series - High Flow Vanguard Precision Regulator - Aluminium
PRECISION & INTERNAL REGULATORS
Part Number: R57M (1/8" & 1/4")
Ambient/Media Temperature: 40° to 125°F (4° to 52°C)
Body & Dome: Aluminum
Fluid Media: Compressed air
Inlet Pressure: 300 psig (21 bar) maximum
Outlet Pressure: Adjustable up to 50 psig (3.4 bar), Adjustable up to 60 psig (4.14 bar) with optional springs, With inlet pressure of 100 psig (7 bar) repeatability is within 0.25 psig
Pressure Gauge: 0 to 160 psig (11 bar); 1/8 NPT gauge ports front and rear
Panel Mounting: 1-3/16 inch (30 mm) hole required
Seals: Nitrile
Self-relieving: Non-relieving optional
Part Number: IR380 (3/8", 1/2", 3/4")
Ambient/Media Temperature: 40° to 125°F (4° to 52°C)
Body: Zinc
Dome: Nylon
Bonnet and Knob: Acetal
Constant Air Bleed Rate: 0.18 – 0.33 scfm at 80 psi secondary pressure
Fluid Media: Compressed air
Inlet Pressure: 250 psig (17 bar) maximum
Outlet Pressure: Adjustable 15 –200 psig (1– 13.7 bar)
Pressure Gauge: 0 to 200 psig (14 bar); 1/4 NPT gauge ports front and rear
Panel Mounting: 2-1/16 (52 mm) hole required
Seals: Nitrile
Valve: Brass
Part Number: IR100 (1/4", 3/8", 1/2" & 3/4")
Ambient/Media Temperature: 40° to 125°F (4° to 52°C)
Body: Zinc
Dome: Nylon
Bonnet and Knob: Acetal
Constant Air Bleed Rate: 0.18 – 0.33 scfm at 80 psi secondary pressure
Fluid Media: Compressed air
Inlet Pressure: 250 psig (17 bar) maximum
Outlet Pressure: Adjustable 15 – 200 psig (1 – 14 bar)
Pressure Gauge: 0 to 200 psig (14 bar); 1/4 NPT gauge ports front and rear
Panel Mounting: 1-3/16 (30 mm) hole required
Seals: Nitrile
Valve: Brass
Part Number: IR180M (3/4", 1", 1-1/4" & 1-1/2")
Ambient/Media Temperature: 40° to 175°F (4° to 79°C)
Body: Aluminum
Valve: Aluminum
Bonnet and Knob: Acetal
Constant Air Bleed Rate: 0.18 – 0.33 scfm at 80 psi secondary pressure
Dome: Nylon
Fluid Media: Compressed air
Inlet Pressure: 300 psig (21 bar) maximum
Outlet Pressure: Adjustable 15 to 200 psig (1 to 14 bar)
Pressure Gauge: 0 to 200 psig (14 bar); 1/4 NPT gauge ports front and rear
Panel Mounting: 1-3/16 (30 mm) hole required
Seals: Nitrile
Valve Cap: Nylon
