PRODUCTS > AIR PREPARATION > MASTER PNEUMATIC > REGULATORS > GENERAL PURPOSE
MASTER PNEUMATIC AIR PREPARATION REGULATORS - GENERAL PURPOSE
Should you require further information or cannot locate a product/service please do not hesitate to make contact - sales@macvalves.co.nz. Scroll through the listed products below for individual product information or click the series link you would like to view:
R10M, R11M Series - Sentry Modular Regulator - Acetel
R55M, R56M, R56S Series - Miniature Regulator - Aluminum/Nylon/Acetal, Stainless Steel
R350, R380 Series - Modular Regulator - Die-Cast Zinc/Polycarbonate/Brass
R67 Series - High Pressure Regulator - Aluminium
R100 Series - Full Size Vanguard Modular Regulator - Zinc/Brass/Acetal
R180M Series - High Flow Vanguard Regulator - Aluminium
GENERAL PURPOSE REGULATORS
Part Number: R10M, R11M (1/8", 1/4")
Ambient/Media Temperature: 40° to 125°F (4° to 52°C
Fluid Media: Compressed airInlet
Pressure: 150 psig (10 bar) maximum
Outlet Pressure: Adjustable up to 100 psig (7 bar)
Pressure Gauge: 0 to 160 psig (11 bar); 1/8 gauge ports front and rear
Panel Mounting: 1-3/16 inch (30 mm) hole required
Part Number: R55M, R56M (1/8", 1/4"), R56S (Stainless 1/4")
Description: Inline mounting, Piston-type design (R55M models) or diaphragm-type (R56M, R56S models), Self-relieving; non-relieving optional, Pressure gauge, NPTF port threads; optional BSPP threads, Miniature regulators have the ability to reverse flow
Ambient/Media Temperature: 40° to 125°F (4° to 52°C)
Dome: Nylon
Knob: Acetal
Fluid Media: Compressed air
Inlet Pressure: 300 psig (21 bar) maximum
Outlet Pressure: Adjustable up to 100 psig (7 bar)
Pressure Gauge: 0 to 160 psig (11 bar); 1/8 NPT gauge ports front and rear
Panel Mounting: 1-3/16 inch (30mm) hole required
Part Number: R350 (Standard 1/4", 3/8", 1/2"), R380 (Large 3/8", 1/2", 3/4")
Ambient/Media Temperature: 40° to 175°F (4° to 79°C)
Body: Zinc
Dome: Nylon
Knob: Acetal
Inlet Pressure: 300 psig (21 bar) maximum
Outlet Pressure: Adjustable up to 150 psig (10 bar) - Standard, Up to 125psig (8.6 bar) - Large. Optional adjusting springs
Optional Pressure Adjustment locking key: Removable
Pressure Gauge: Optional 0 to 200psig (14bar); . 1/4-NPT gauge ports front & rear
Panel Mounting: 2-1/16 inch (52 mm) hole required
Seals: Nitrile
Self-relieving: Non-relieving optional
Valve: Brass
Valve Cap: Nylon
Yellow, blue, red & grey colour caps available for visual management (Large).
Part Number: R67 (1/8", 1/4", 3/8")
Ambient/Media Temperature: 40° to 175°F (4° to 79°C)
Body and Dome: Aluminum
Inlet Pressure: 400psig (27.5bar) maximum
Knob: Glass filled Nylon
Outlet Pressure: Adjustable up to 390psig (26bar); optional 0-100psig (7bar) and 0-200psig (14bar)
Pressure Gauge: 0 to 200psig (0 to 14bar); optional 0 to 600psig (0 to 41bar); 1/4-NPTF gauge ports on front and rear of head
Seals and O-rings: Nitrile; optional Viton
Panel Mounting: 1-9/16 inch (40mm) hole required
Part Number: R100 (1/4", 3/8", 1/2" & 3/4")
Ambient/Media Temperature: 40° to 175°F (4° to 79°C)
Body: Zinc
Dome: Nylon; aluminum with optional 0-175 psig spring
Fluid Media: Compressed air
Inlet Pressure: 300 psig (21 bar) maximum
Outlet Pressure: Adjustable up to 125 psig (8.6 bar)
Pressure Adjustment Locking Key: Removable
Pressure Gauge: 0 to 200 psig (14 bar); 1/4 NPT gauge ports front and rear
Panel Mounting: 2-1/16 inch (52 mm) hole required
Seals: Nitrile
Knob: Acetal
Valve: Brass
Valve Cap: Nylon
Part Number: R180M (Standard 3/4" & 1"), R180 (Large 1 1/4" & 1 1/2")
Ambient/Media Temperature: 40° to 175°F (4° to 79°C)
Body: Aluminum
Dome: Nylon; aluminum with optional 0-150 psig spring
Fluid Media: Compressed air
Inlet Pressure: 300 psig (21bar) maximum
Outlet Pressure: Adjustable up to 100psig (7bar)
Pressure Adjustment Locking Key: Removable
Pressure Gauge: 0 to 200 psig (14 bar); 1/4 NPT gauge ports front and rear
Panel Mounting: 2-1/16 inch (52mm) hole required
Seals: Nitrile
Knob: Acetal
Valve: Aluminum
Valve Cap: Nylon
