PRODUCTS > FITTINGS & TUBING > FUNCTION FITTINGS > SENSOR FITTINGS
FITTINGS & TUBING - FUNCTION FITTINGS - SENSOR FITTINGS
Click here to download the full MVP Fittings & Tubing PDF catalogue or see below for individual product information.
Should you require further information or cannot locate a product/service please do not hesitate to make contact - sales@macvalves.co.nz. Scroll through the listed products below for individual product information or click the series link you would like to view:
Pneumatic Sensor Female, BSP Parallel and Metric
Pneumatic/ Electric Sensor, BSPP Metric and NPT
Pneumatic Sensor Female BSPT and NPT
SENSOR FITTINGS
With push-in connection, BSP parallel thread. Compact, perfectly suited to your installations, with pneumatic or electronic exit, can be assembled on the cylinder or the control valves, easy to use due to their low exhaust back pressure.
Maximum Working Pressure: 8 bar / 1 MPa / 116 psi
Working Temperature: -15 to 60 °C / 5 to 140 °F / 258 to 333 °K
Body: Technical Polymer
Sub-base: Zamak
'O'-rings: NBR
Sealing Washer: Technical Polymer
Gripping Ring: Stainless Steel
Screw: Brass
Pneumatic Sensor Female, BSP Parallel and Metric
Produce an end-of-stroke signal -pneumatic or electric when the exhaust back pressure in the cylinder disappears.
Maximum Working Pressure: 8 bar / 1 MPa / 116 psi
Working Temperature: -15 to 60 °C / 5 to 140 °F / 258 to 333 °K
Body: Technical Polymer
Sub-base: Zamak
'O'-rings: NBR
Sealing Washer: Technical Polymer
Screw: Brass
For more information please refer to our catalogue
Ready to install - supplied with 3 core 0.5 mm² cable, length 2 metres. Compact, perfectly suited to your installations, with pneumatic or electronic signal, they can be assembled on the cylinder or control valve, easy to use due to their low exhaust back pressure.
Maximum Working Pressure: 8 bar / 1 MPa / 116 psi
Working Temperature: -15 to 60 °C / 5 to 140 °F / 258 to 333 °K
Body: Technical Polymer
'O'-rings: NBR
Sealing Washer: Technical Polymer
Screw: Brass
With push-in connection, NPT or UNF thread. Compact, perfectly suited to your installations, with pneumatic or electronic signal, can be assembled on a cylinder or control valve, easy to use due to their low exhaust back pressure.
Working Temperature: -15 to 60 °C / 5 to 140 °F / 258 to 333 °K
Body: Technical Polymer
'O'-rings: NBR
Pneumatic Sensor Female BSPT and NPT
Produce an end-of-stroke signal -pneumatic or electric when the exhaust back pressure in the cylinder disappears.
Maximum Working Pressure: 8 bar / 1 MPa / 116 psi
Working Temperature: -15 to 60 °C / 5 to 140 °F / 258 to 333 °K
Body: Technical Polymer
Sub-base: Zamak
'O'-rings: NBR
Sealing Washer: Technical Polymer
Gripping Ring: Stainless Steel
Surface Treatment: PTFE
Screw: Brass
For more information please refer to our catalogue