Soft Start Fitting for Isolating Valve BSPP
Allow air pressure to gradually increase. Designed to be mounted on the FRL outlet or group of valves, they protect the whole downstream installation. Instant connection and BSP parallel thread.
Maximum Working Pressure: 10 bar / 1 MPa / 145 psi
Working Temperature: -15 to 60 °C / 5 to 140 °F / 258 to 333 °K
Body: Technical Polymer
Body 2: Nickel Plated Brass
'O'-rings: NBR
Sealing Washer: Technical Polymer
Gripping Ring: Stainless Steel

For more information please refer to our catalogue

Soft Start Fitting for Isolating Valve BSPP
Allow air pressure to gradually increase. Designed to be mounted on the FRL outlet or group of valves, they protect the whole downstream installation. Instant connection and BSP parallel thread.
Maximum Working Pressure: 10 bar / 1 MPa / 145 psi
Working Temperature: -15 to 60 °C / 5 to 140 °F / 258 to 333 °K
Body: Technical Polymer
Body 2: Nickel Plated Brass
'O'-rings: NBR
Sealing Washer: Technical Polymer

For more information please refer to our catalogue

Soft Start Fitting for Control Valve BSPP
Allow air pressure to gradually increase. Designed to be mounted on the FRL outlet or a group of valves, thus the pressurization speed of the control valve can be adjusted to an optimum. Instant connection and BSP parallel thread.
Maximum Working Pressure: 10 bar / 1 MPa / 145 psi
Working Temperature: -15 to 60 °C / 5 to 140 °F / 258 to 333 °K
Body: Technical Polymer
Body 2: Nickel Plated Brass
'O'-rings: NBR
Sealing Washer: Technical Polymer
Gripping Ring: Stainless Steel

For more information please refer to our catalogue

Soft Start Fitting for Control Valve BSPP
Allow air pressure to gradually increase. Designed to be mounted on the FRL outlet or or group of valves, thus the pressurization speed of the control valve can be adjusted to an optimum. Instant connection and BSP parallel thread.
Maximum Working Pressure: 10 bar / 1 MPa / 145 psi
Working Temperature: -15 to 60 °C / 5 to 140 °F / 258 to 333 °K
Body: Nickel Plated Brass
Body 2: Nickel Plated Brass
'O'-rings: NBR
Sealing Washer: Technical Polymer

For more information please refer to our catalogue

Soft Start Fitting NPT
Allow air pressure to gradually increase. Designed to be mounted on the FRL outlet or group of valves, they protect the whole downstream installation. Instant connection and NPT thread.
Maximum Working Pressure: 10 bar / 1 MPa / 145 psi
Working Temperature: -15 to 60 °C / 5 to 140 °F / 258 to 333 °K
Body: Nickel Plated Brass
Body 2: Nickel Plated Brass
'O'-rings: NBR
Sealing Washer: Technical Polymer
Gripping Ring: Stainless Steel
Surface Treatment: PTFE

For more information please refer to our catalogue

Soft Start Fitting for Control Valve NPT
Allow air pressure to gradually increase. Designed to be mounted on the FRL outlet or or group of valves, thus the pressurization speed of the control valve can be adjusted to an optimum. Instant connection and NPT thread.
Maximum Working Pressure: 10 bar / 1 MPa / 145 psi
Working Temperature: -15 to 60 °C / 5 to 140 °F / 258 to 333 °K
Body: Nickel Plated Brass
Body 2: Nickel Plated Brass
'O'-rings: NBR
Sealing Washer: Technical Polymer
Gripping Ring: Stainless Steel
Surface Treatment: PTFE

For more information please refer to our catalogue

Pressure Regulator, Male BSPP
Stabilize the pressure at a given value. Very compact, they can be assembled downstream or upstream of the distributor. Mounted in series on a manifold, these fittings control the supply required for each piece of equipment. Model with instant connection and BSP parallel thread.
Working Temperature: -10 to 70 °C / 14 to 158 °F / 263 to 343 °K
Body: Technical Polymer
Body 2: Nickel Plated Brass
'O'-rings: NBR
Gripping Ring: Stainless Steel
Screw: Nickel Plated Brass

For more information please refer to our catalogue

Pressure Regulator Male BSPT and NPT
Stabilize the pressure at a given value. Very compact, they can be assembled downstream or upstream of the distributor. Mounted in series on a manifold, they control the supply required for each piece of equipment. Model with instant fitting and NPT thread.
Working Temperature: -10 to 70 °C / 14 to 158 °F / 263 to 343 °K
Body: Techncal Polymer
'O'-rings: NBR
Screw: Nickel Plated Brass

For more information please refer to our catalogue

Pressure Reducer Banjo, Male BSPP
An energy-saving tool by optimizing the pressure required for your cylinders. Banjo with instant connection, BSP parallel. Visual control of saving level: maximum, improved or standard Manual adjustment by a 6 mm hexagonal key or with a manual ratchet control (available separately Part No 7000 00 00).
Maximum Working Pressure: 8 bar / 1 MPa / 116 psi
Working Temperature: -15 to 60 °C / 5 to 140 °F / 258 to 333 °K
Body: Zamak
'O'-rings: NBR
Sealing Washer: Technical Polymer
Gripping Ring: Stainless Steel
Screw: Nickel Plated Brass

For more information please refer to our catalogue

Pressure Reducer Banjo Female/Male BSPP
An energy-saving tool by optimizing the pressure required for your cylinders. Banjo with threaded connection BSP parallel. Visual control of saving level: maximum, improved or standard. Manual adjustment by a 6 mm hexagonal key or with a manual ratchet control (available separately Part No 7000 00 00).
Maximum Working Pressure: 8 bar / 1 MPa / 116 psi
Working Temperature: -15 to 60 °C / 5 to 140 °F / 258 to 333 °K
Body: Zamak
'O'-rings: NBR
Sealing Washer: Technical Polymer
Screw: Nickel Plated Brass

For more information please refer to our catalogue

Pressure Reducer In-Line Male
An energy-saving tool by optimizing the pressure required by your cylinders. In-line model with push-in connection. Visual control of saving level: maximum, improved or standard Manual adjustment via a 6 mm hexagonal key or using a manual ratchet control (sold separately part No 7000 00 00).
Maximum Working Pressure: 8 bar / 1 MPa / 116 psi
Working Temperature: -15 to 60 °C / 5 to 140 °F / 258 to 333 °K
Body: Nickel Plated Brass
'O'-rings: NBR
Sealing Washer: Technical Polymer
Gripping Ring: Stainless Steel
Screw: Nickel Plated Brass

For more information please refer to our catalogue

Pressure Reducer In-Line Female BSPP
An energy-saving tool by optimizing the pressure required for your cylinders. In-line model with threaded connection BSP parallel. Visual control of saving level: maximum, improved or standard. Manual adjustment by a 6 mm hexagonal key or with a manual ratchet control (available separately Part No 7000 00 00).
Maximum Working Pressure: 8 bar / 1 MPa / 116 psi
Working Temperature: -15 to 60 °C / 5 to 140 °F / 258 to 333 °K
Body: Nickel Plated Brass
'O'-rings: NBR

For more information please refer to our catalogue