PRODUCTS > FITTINGS & TUBING > COMPRESSION FITTINGS > NICKEL PLATED BRASS COMPRESSION FITTINGS
FITTINGS & TUBING - COMPRESSION FITTINGS - NICKEL PLATED BRASS
Should you require further information or cannot locate a product/service please do not hesitate to make contact - sales@macvalves.co.nz
Click here to download the full Fittings & Tubing PDF catalogue or see below for individual product information. Scroll through the listed products below for individual product information or click the series link you would like to view:
Male Stud Fittings
Banjo Fittings
Equal Fittings
Nuts
MALE STUD FITTINGS
Stud Fitting Male BSPT Thread
In-line connection of tubing with male thread. Compatible with BPLM-M nut only
Material: Nickel Plated Brass
Maximum Working Pressure: 18 bar / 2 MPa / 261 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
For more information please contact us
Stud Fitting Male BSPT Thread
In-line connection of tubing with male thread.Compatible with BPLM nut only. Maximum working pressure: 40 bar
Material: Nickel Plated Brass
Maximum Working Pressure: 40 bar / 4 MPa / 580 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
For more information please contact us
Stud Fitting Male BSPP Thread
In-line connection of tubing with female thread. Compatible with BPLM-M nut only
Material: Nickel Plated Brass
Maximum Working Pressure: 18 bar / 2 MPa / 261 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
'O' Ring: NBR
For more information please contact us
Stud Fitting Male Metric Thread
In-line connection of tubing with male thread. Compatible with BPLM nut only Maximum working pressure: 40 bar.
Material: Nickel Plated Brass
Maximum Working Pressure: 18 bar / 2 MPa / 261 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
'O' Ring: NBR
For more information please contact us
Stud Fitting Male Metric Thread
In-line connection of tubing with male thread. Compatible with BPLM nut only
Maximum working pressure: 40 bar. These fittings are supplied with a copper seal.
Material: Nickel Plated Brass
Maximum Working Pressure: 40 bar / 4 MPa / 580 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
'O' Ring: Copper
For more information please contact us
Stud Elbow Male BSPT Thread
Tube to male thread 90 degree elbow connection. Compatible with BPLM-M nut only
Material: Nickel Plated Brass
Maximum Working Pressure: 18 bar / 2 MPa / 261 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
For more information please contact us
Stud Elbow Male BSPT Thread
Tube to male thread 90 degree elbow connection. Compatible with BPLM nut only
Maximum working pressure: 40 bar
Material: Nickel Plated Brass
Maximum Working Pressure: 40 bar / 4 MPa / 580 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
For more information please contact us
Stud Elbow Male BSPP Thread
Tube to female thread 90 degree elbow connection. These fittings are supplied with nitrile seals. Compatible with BPLM-M nut only
Material: Nickel Plated Brass
Maximum Working Pressure: 18 bar / 2 MPa / 261 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
'O' Ring: NBR
For more information please contact us
Stud Elbow Male Metric Thread
Tube to male thread 90 degree elbow connection. These fittings are supplied with nitrile seals. Compatible with BPLM nut only. Maximum working pressure: 40 bar
Material: Nickel Plated Brass
Maximum Working Pressure: 40 bar / 4 MPa / 580 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
'O' Ring: NBR
For more information please contact us
Stud Run Tee Male BSPT Thread
Connection of 2 tubes at a 90° angle with male thread. Compatible with BPLM-M nut only.
Material: Nickel Plated Brass
Maximum Working Pressure: 18 bar / 2 MPa / 261 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
For more information please contact us
Stud Branch Tee Male BSPT Thread
Connection of 2 tubes at a 180° angle with male thread. Compatible with BPLM-M nut only.
Material: Nickel Plated Brass
Maximum Working Pressure: 18 bar / 2 MPa / 261 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
For more information please contact us
BANJO FITTINGS
Single Banjo Male BSPP Thread
Tube to male thread 90 degree elbow connection. These parts are supplied with peripheral seals. The banjo bolt is made of steel. Compatible with BPLM-M nut only
Material: Nickel Plated Brass
Maximum Working Pressure: 18 bar / 2 MPa / 261 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
Screw: Treated Steel
For more information please contact us
EQUAL FITTINGS
Equal Tube-to-Tube Connector
Connection of 2 tubes together at a 180° angle. Compatible with BPLM-M nut only
Material: Nickel Plated Brass
Maximum Working Pressure: 18 bar / 2 MPa / 261 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
For more information please contact us
Equal Tee
Connection of 3 tubes at two 90° angles. Compatible with BPLM-M nut only
Material: Nickel Plated Brass
Maximum Working Pressure: 18 bar / 2 MPa / 261 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
For more information please contact us
Equal Tee
Connection of 3 tubes at two 90° angles. Compatible with BPLM nut only. Maximum working pressure: 40 bar
Material: Nickel Plated Brass
Maximum Working Pressure: 40 bar / 4 MPa / 580 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
For more information please contact us
Equal Bulkhead Connector
Connection of 2 tubes together at a 180° angle through a panel. Compatible with BPLM-M nut only
Material: Nickel Plated Brass
Maximum Working Pressure: 18 bar / 2 MPa / 261 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
For more information please contact us
NUTS
Nut
Used with the body and sleeve to form a complete compression fitting. Maximum working pressure: 40 bar
Material: Nickel Plated Brass
Maximum Working Pressure: 40 bar / 4 MPa / 580 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
For more information please contact us
Nut
Used with the body and sleeve to form a complete compression fitting.
Material: Nickel Plated Brass
Maximum Working Pressure: 18 bar / 2 MPa / 261 psi
Working Temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
For more information please contact us