PRODUCTS > FITTINGS & TUBING > COMPRESSION FITTINGS > BRASS COMPRESSION FITTINGS
FITTINGS & TUBING - COMPRESSION FITTINGS - BRASS
Should you require further information or cannot locate a product/service please do not hesitate to make contact - sales@macvalves.co.nz
Click here to download the full Fittings & Tubing PDF catalogue or see below for individual product information. Scroll through the listed products below for individual product information, click the series link you would like to view or to search by image click here:
MALE STUD FITTINGS
In-line connection of tubing with male thread. Available from 4 to 28 mm o.d.
Material: Brass
Maximum working pressure: 550 bar/ 55 MPa/ 7977 psi
Working temperature: -60 to 250 °C/ -76 to 482 °F/ 213 to 523 °K
Vacuum capability: 755 mm Hg
Fitting: BSPT
In-line connection of a tubing with male thread. Available from 4 to 28 mm o.d., BSPT metric thread.
Material: Brass
Working temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
Sealing washer: Technical Polymer
Fitting: BSPT Metric Thread
In-line connection of a tubing with male thread, with bi-material seal.To ensure perfect sealing and excellent resistance to compression. Available from 4 to 28 mm o.d., BSPT metric thread.
Material: Brass
working temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
'O'-rings: Zinc Plated Steel with NBR Seal
In-line connection of a tubing with male thread. Available from 4 to 18 mm o.d., metric thread.
Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
Tube to male thread 90 degree elbow connection. Available from 4 to 28 mm o.d.
Material: Brass
Maximum working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
Tube to male thread 90 degree elbow connection. Available from 4 to 28 mm o.d.
Material: Brass
Maximum working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
Orientable 90 degree elbow connection of tubing and a male thread. Available in 4 to mm o.d., BSPT or NPT thread.
Material: Brass
Maximum working temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
'O'-rings: NBR
Connection of 2 tubes at a 180° angle with male thread. Available from 4 to 22 mm o.d. in BSPT or NPT thread
Material: Brass
Maximum working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
Connection of 2 tubes at a 90° angle with male thread. Available from 4 to 22 mm o.d., BSPT thread.
Material: Brass
Maximum working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
FEMALE STUD FITTINGS
In-line connection of tubing with female thread. Available from 4 to 25 mm o.d., BSPP thread.
Material: Brass
Maximum working pressure: 550 bar / 55 MPa / 7977 psi
Working temperature: -60 to 250 °C / -76 to 482 °F / 213 to 523 °K
Vacuum capability: 755 mm Hg
BANJO FITTINGS
Single banjo elbow connection between tube and male thread. Available form 4 to 22 mm o.d., BSPT or NPT thread.
Material: Brass
Maximum working pressure: 20 bar / 2 MPa / 290 psi
Working temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
Sealing washer: Technical Polymer
Single banjo elbow connection between tube and male thread, with bi-material seal. To ensure perfect sealing and excellent resistance to compression. Available from 4 to 22 mm o.d., BSPT or NPT thread.
Material: Brass
Working temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
Sealing washer: Zinc Plated Steel with NBR Seal
Double banjo connection between tube and male thread. Top knob adjustment made with a flat spanner, optimized for difficult access problems.
Material: Brass
Working temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
Sealing washer: Technical Polymer
Double banjo connection between tube and male thread, with bi-material seal. To ensure perfect sealing and excellent resistance to compression. Top knob adjustment made with a flat spanner, optimized for difficult access problems.
Material: Brass
Working temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
Sealing washer: Zinc Plated Steel with NBR Seal
EQUAL ENDED COUPLERS
Equal Ended Straight Coupling Connection of 2 tubes together at a 180° angle. Available from 4 to 28 mm o.d.
Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
Connection of 2 tubes together at a 180° angle through a panel. Available from 4 to 25 mm o.d.
Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
Connection of 2 tubes together at a 90° angle. Available from 4 to 28 mm o.d.
Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
Connection of 3 tubes at two 90° angles. Available from 4 to 16 mm o.d.
Material: Brass
Maximum Working Pressure: 550 bar / 55 MPa / 7977 psi
Vacuum capability: 755 mm Hg
Working temperature: -60 to 250 °C / -76 to 482 °F / 213 to 523 °K
Connection of 3 tubes at two 90° angles. Available from 4 to 16 mm o.d.
Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
Connection of 4 tubes at 90° angles. Available from 4 to 25 mm o.d.
Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
REDUCTION ASSEMBLY
Enables small-sized tubing to be used with a standard Legris coupling designed for larger sized tubes. Available from 4 to 22 mm o.d.
Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
OLIVES
For use with the body and nut in order to form a complete Legris compression fitting. Recommended for connection to thermoplastic, brass or hardened copper. Ensures optimum sealing of installation.
Material: Brass
Working temperature: -60 to 250 °C / -76 to 482 °F / 213 to 523 °K
Maximum Working Pressure: 550 bar / 55 MPa / 7977 psi
Vacuum capability: 755 mm Hg
Used with the body and nut in order to form a complete Legris compression fitting. Ensures optimum sealing of assembly. For use with steel tubing.
Material: Zinc Plated Steel
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
Used with a body and nut in order to form a complete Legris compression fitting. Can be assembled on annealed copper tubing. Ensures optimum sealing of installation.
Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
NUTS
Used with a body and sleeve to form a complete Legris compression fitting. Ensures optimum sealing of installation.
Material: Brass
Maximum Working Pressure: 550 bar / 55 MPa / 7977 psi
Working temperature: -60 to 250 °C / -76 to 482 °F / 213 to 523 °K
Vacuum capability: 755 mm Hg
For use with the body and sleeve in order to form a complete Legris compression fitting. Ensures optimum sealing of assembly. For use with steel tubing.
Material: Zinc Plated Steel
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For use with the body and sleeve in order to form a complete Legris compression fitting. Suitable for annealed copper tubing and for all applications with strong vibrations. Ensures perfect sealing of tube.
Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
Acts as both the nut and sleeve when used with soft thermoplastic tubing
Material: Technical Polymer
Working temperature: -20 to 80 °C / -4 to 176 °F / 253 to 353 °K
Male nut for standard sleeve. Available from 4 to 14 mm o.d.
Material: Brass
Maximum Working Pressure: 550 bar / 55 MPa / 7977 psi
Vacuum capability: 755 mm Hg
Working temperature: -60 to 250 °C / -76 to 482 °F / 213 to 523 °K
TAILPIECE ADAPTORS
Quick connection of a hose to a compression fitting. Available from 4 to 28 mm o.d.
Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
Quick connection of tubing to a compression fitting.Available from 4 to 16 mm o.d.
Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
PLUGS
Used to cap off tubing in a compression fitting. Replaces the sleeve. Available from 4 to 28 mm o.d.
Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
Used to cap off unused tubing, comprising a sleeve and a nut in a compression fitting. Available from 4 to 14 mm o.d.
Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
STRAIGHT STEM ADAPTOR
Male thread straight stem adaptor. Available from 4 to 28 mm o.d.
Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
Male thread straight stem adaptor with bi-material seal. Available from 4 to 28 mm o.d.
Working temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
Sealing Washer: Zinc Plated Steel with NBR Seal
Material: Brass
